|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
OK?..manual is complet and helpfull... for repairing such a old and rare boombox like JVC PCM it is necessary...
;
Super Anleitung. Ordentliche Auflösung. Das ganze noch in Deutsch wäre zu schön. Alle Datenblätter sind sauber Kopiert und alle Leitungswege sind sauber ausgeführt
;
Thanks God for the internet and thanks for the service like this - proffessional solution on time.
;
About the service it's very fast and reliable. About the manual the quality is high enough to read even the tiniest details on the wiring diagrams so you can't ask much more than that, let it alone for a manual of a product from 20 years ago. Thank you, very satisfied.
;
The downloaded quality was as good as the orignial
AVR340
harman/kardon
<8>VIDEO PCB(40-1) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Disconnect the lead wire(BN41-6P) on the Tone PCB(37-3) from connector(CN41) on the Video PCB(40-1 3.Disconnect the connector (CN15-Card cable) on the Input PCB(39-1) from connector(CN43) on the Video PCB(40-1). 4. Remove 6 screws(S8) and then remove the Video PCB(40-1). <9>I-POD PCB(41) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Disconnect the lead wire(BN42-5P) on the INPUT PCB(39-1) from connector(CN42) on the I-POD PCB(41). 3. Disconnect the lead wire(BN45-4P) on the INPUT PCB(39-1) from connector(CN45) on the I-POD PCB(41). 4. Disconnect the lead wire(BN44-4P) on the Download PCB(37-9) from connector(CN42) on the I-POD PCB(41). 5. Remove 2 screws(S13) and then remove the I-POD PCB(41). <10>INPUT PCB(39-1) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Remove the Connect PCB(37-7). 3. Disconnect the lead wire(BN18-5P) on the Digital input PCB(37-8) from connector(CN18) on the Input PCB(39-1). 4. Disconnect the connect (BN72-Card canle)) on the Fip PCB(37-1) from connector(CN72) on the Input PCB(39-1) 5. Remove 11 screws(S8,S11) and then remove the Input PCB(39-1). <11>Download PCB(37-9) REMOVAL 1.Remove the Top-cabinet, referring to the previous step<1>. 2.Disconnect the connector(CN15) from lead wire(BN15-8P) on the Fip PCB(37-2) 3.Remove 2 screws(S4) and then remove the Download PCB(37-9). <12>POWER TRANS(36) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Disconnect the connector (BN20,BN96) on the Trans PCB(40-4) from lead wire(CN20-3P,CN96-6P) on the Main PCB(38-1). 3. Remove 4 Trans screws(S9) and then remove the Power Trans(36). <13>MAIN PCB ASS�Y(38-1) REMOVAL 1. Remove the Top-cabinet, referring to the previous step<1>. 2. Remove the Tuner module, referring to the previous step<7>. 3. Remove the Video PCB, referring to the previous step<8>. 4. Remove the Input PCB, referring to the previous step<9>. 5. Disconnect the connector(CN80) from lead wire(BN80-11P) on the Fip PCB(37-1). 6. Disconnect the connector(CN91) from lead wire(BN91-3P) on the Moms PCB(37-5). 7. Disconnect the connector (CN20,BN96) from lead wire(CN20-3P,BN96-8P) on the Trans PCB(40-4,40-5) 8. Remove 11screws(S1-1EA, S4-2EA, S6-2EA, S8-6EA) and then remove the Main PCB ASS�Y(38-1).
31
|
|
|
> |
|
